HS code 7208.26: Hot rolled steel coil
HS code 7208.26 covers: Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm. It is a subheading of heading 7208, in chapter 72.
Where 7208.26 sits in the tariff
The first six digits are the same in every country that uses the Harmonized System. Countries and regions add their own digits after them.
Chapter
72 Iron and steel
Heading
7208II. IRON AND NON-ALLOY STEEL
Subheading
7208.26 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm
Other subheadings under heading 7208
- 7208.10Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief
- 7208.25Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more
- 7208.26Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mmThis page
- 7208.27Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm
- 7208.36Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm
- 7208.37Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm
- 7208.38Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm
- 7208.39Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm
- 7208.40Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief
- 7208.51Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm
- 7208.52Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm
- 7208.53Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm
- 7208.54Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm
- 7208.90Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208
How tariffs divide 7208.26 further
National and regional tariffs add digits after the six shared ones, splitting this subheading into more specific lines. The tables list every line we hold for 7208.26 in this language, in each publisher's own wording.
| Tariff | Applies in | Lines |
|---|---|---|
| EU Combined Nomenclature (CN8) | European Union | 1 |
| US Harmonized Tariff Schedule | United States | 2 |
| UK Global Tariff commodity codes | United Kingdom | 1 |
| India ITC-HS (8-digit) | India | 5 |
| GCC integrated customs tariff (12-digit) | Gulf Cooperation Council, UAE schedule | 2 |
| EAC Common External Tariff | East African Community | 1 |
| Brazil NCM | Brazil and Mercosur | 2 |
| Turkey GTIP | Türkiye | 2 |
| Egypt customs tariff (10-digit) | Egypt | 1 |
| ECOWAS Common External Tariff | West Africa | 1 |
| Lines in total | 18 | |
EU Combined Nomenclature (CN8)
European Union — 1 line
| Code | Description |
|---|---|
| 7208 26 00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated – Other, in coils, not further worked than hot-rolled, pickled – Of a thickness of 3 mm or more but less than 4,75 mm |
US Harmonized Tariff Schedule
United States — 2 lines
| Code | Description |
|---|---|
| 7208 26 00 30 | Other, in coils, not further worked than hot-rolled, pickled – Of a thickness of 3 mm or more but less than 4.75 mm – High-strength steel |
| 7208 26 00 60 | Other, in coils, not further worked than hot-rolled, pickled – Of a thickness of 3 mm or more but less than 4.75 mm – Other |
UK Global Tariff commodity codes
United Kingdom — 1 line
| Code | Description |
|---|---|
| 7208 26 00 00 | Other, in coils, not further worked than hot-rolled, pickled – Of a thickness of 3 mm or more but less than 4,75 mm |
India ITC-HS (8-digit)
India — 5 lines
| Code | Description |
|---|---|
| 7208 26 10 | Other, in coils, not further worked than hot- rolled, pickled : – Of a thickness of 3 mm or more but less than 4.75 mm : – Plates |
| 7208 26 20 | Other, in coils, not further worked than hot- rolled, pickled : – Of a thickness of 3 mm or more but less than 4.75 mm : – Universal plates |
| 7208 26 30 | Other, in coils, not further worked than hot- rolled, pickled : – Of a thickness of 3 mm or more but less than 4.75 mm : – Sheets |
| 7208 26 40 | Other, in coils, not further worked than hot- rolled, pickled : – Of a thickness of 3 mm or more but less than 4.75 mm : – Strip |
| 7208 26 90 | Other, in coils, not further worked than hot- rolled, pickled : – Of a thickness of 3 mm or more but less than 4.75 mm : – Other |
GCC integrated customs tariff (12-digit)
Gulf Cooperation Council, UAE schedule — 2 lines
| Code | Description |
|---|---|
| 7208 26 00 00 01 | Flat-rolled product of iron or non-alloy steel, of a width of 600 mm or more, in coils, not further worked than hot-rolled, pickled, of a thickness of 3 mm or more but less than 4.75 mm, not clad, plated or coated. - Of a thickness of 3 mm or more but less than 4.75 mm Of iron |
| 7208 26 00 00 02 | Flat-rolled product of iron or non-alloy steel, of a width of 600 mm or more, in coils, not further worked than hot-rolled, pickled, of a thickness of 3 mm or more but less than 4.75 mm, not clad, plated or coated. - Of a thickness of 3 mm or more but less than 4.75 mm Of steel |
EAC Common External Tariff
East African Community — 1 line
| Code | Description |
|---|---|
| 7208 26 00 | Other, in coils, not further worked than hot-rolled, pickled – Of a thickness of 3 mm or more but less than 4.75 mm |
Brazil NCM
Brazil and Mercosur — 2 lines
Machine translation by Customs Declare, not the publisher's text.
| Code | Description |
|---|---|
| 7208 26 10 | Other, in coils, simply hot-rolled, pickled: – Of a thickness of 3 mm or more but less than 4.75 mm – With a minimum yield strength of 355 MPa |
| 7208 26 90 | Other, in coils, simply hot-rolled, pickled: – Of a thickness of 3 mm or more but less than 4.75 mm – Other |
Turkey GTIP
Türkiye — 2 lines
Machine translation by Customs Declare, not the publisher's text.
| Code | Description |
|---|---|
| 7208 26 00 10 00 | Other (in coils, merely hot-rolled and pickled): – Of a thickness of 3 mm or more but less than 4,75 mm: – Containing by weight 960.6 or more carbon |
| 7208 26 00 90 00 | Other (in coils, merely hot-rolled and pickled): – Of a thickness of 3 mm or more but less than 4,75 mm: – Other |
Egypt customs tariff (10-digit)
Egypt — 1 line
Machine translation by Customs Declare, not the publisher's text.
| Code | Description |
|---|---|
| 7208 26 00 00 | Flat-rolled products of iron or non-alloy steel, in coils, not further worked than hot-rolled [other than with patterns in relief], chemically descaled, of a thickness of 3 mm or more but less than 4.75 mm, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. |
ECOWAS Common External Tariff
West Africa — 1 line
Machine translation by Customs Declare, not the publisher's text.
| Code | Description |
|---|---|
| 7208 26 00 00 | Other, in coils, simply hot-rolled, pickled – Of a thickness of 3 mm or more but less than 4.75 mm |
Descriptions are shown for reference in the publishers' own wording. They are not the official legal text. See all data sources.
Check this code against your invoice
Customs Declare reads your invoice, proposes an HS code for each line and prepares the declaration. A person approves every one.